Preparing Your Quilt Top and Backing
Steps to Prepare your Quilt Top.
Please note that each of the 3 layers (Top, Batting and
Backing) will be mounted on the machine separately. Do not stitch or baste them
together.
Mark the TOP EDGE of your Quilt Top and Backing Fabric with
the labels supplied at the bottom of the Order Form. Cut the Labels on the
dotted lines and use a safety pin to attach them to your Quilt Top and Backing
Fabric.
Trim all excess seams and points.
Trim all loose threads.
Press all seams flat.
STITCH around the outer perimeter of your quilt top
approximately 1/8” from the edge to prevent any seams from pulling open during
the quilting process.
Steps to Prepare Backing Fabric.
NOTE: Backing and Batting size must be at least 8” wider and
longer than the Quilt Top. When purchasing your fabric, remember to allow for
5% shrinkage when determining the yardage you will need.
Backing must be Square, meaning the Top & Bottom edges
must be parallel to each other and the corners 90° angles. Each side should
also measure the same length.
If your back is pieced, use a 1/2” seam and be sure to trim
off all selvage edges. Press the seam to one side.
Print and Fill Out an Order Form.
Include the Order Form with your quilt. Make a copy to keep
for your records.
I will always call to discuss your quilt before I begin
working on it. Please list a number where you can be reached and the best time
to call.
Feel free to call (469)796-0143 if you have questions about
sending your quilt